The ASLB-T is a microstepping motor driver with built-in translator in 24 pin SOIC package. It is designed to operate bipolar stepper motors in full, half. PMIC – Motor Drivers, Controllers. Manufacturer, Allegro MicroSystems, LLC. Series, -. Packaging? Tube? Part Status, Obsolete. Motor Type – Stepper, Bipolar. ASLPTR-T – Allegro MicroSystems, LLC | ND · ASLPTR-T; Allegro MicroSystems, LLC; IC MOTOR DRIVER PAR 24TSSOP; Unit Price.
|Published (Last):||19 February 2017|
|PDF File Size:||9.99 Mb|
|ePub File Size:||3.6 Mb|
|Price:||Free* [*Free Regsitration Required]|
There are no phase-sequence tables, high-frequency control lines, or complex interfaces to program. Espaces de noms Page Discussion. This needs to be a 0V to 5V or 0V to 3. Connect this to allegor positive power supply lead.
A and B are the two coils of the motor, and can swap the two wires for a given allegdo it will just reverse the direction of the motor. This one is complicated – please see the datasheet for more information.
Special power-up sequencing is not required. Connect the negative allefro of your power supply, as well as from any other boards you are using to drive the Easy Driver to one or more of the GND pins.
By simply inputting one pulse on the STEP input the motor will take one step full, half, quarter, or eighth depending on two logic inputs.
Electronique/Hardware/Moteurs/Allegro A – EasyDriver —
These digital inputs control the microstepping mode. Click the image to view larger.
The translator is the key to the easy implementation of the ASLB. If this is not your local representative, find your local sales rep here. The tabs are at ground potential and need no insulation.
Electronique/Hardware/Moteurs/Allegro A3967 – EasyDriver
Internal circuit protection includes thermal shutdown with hysteresis, under-voltage lockout UVLO and crossover-current protection. We’ll notify you when there are updates to this product. See below diagrams for how to hook these up. The ASLB includes a fixed off-time current regulator that has the ability to operate in slow, fast, or mixed current-decay modes.
Allegro MicroSystems – A Microstepping Driver with Translator
This normally high input signal will minimize power consumption by disabling internal circuitry and the output drivers when pulled low.
Each rising edge of this signal will cause one step or microstep to be taken. The ASLB is a complete microstepping motor driver with built-in translator. Affichages Lire Voir le texte source Alelgro. This is the power input to the Easy Driver. This current-decay control scheme results in reduced audible motor noise, increased step accuracy, and reduced power dissipation. Menu de navigation Outils personnels Se connecter.
We default it to slow decay mode, but you can override with your own voltage on this pin.
Ce site contient essentiellement des notes de travail. They are all connected together inside the board. This normally high input signal will reset the internal translator and disable all output drivers when pulled low. This should be a 6V to 30V, 2A or more power supply that is clean low ripple. There are no news items available for this product.